|
|
|||
  |
EMG-808 Humbucker Pickup The EMG-808 is similar to the EMG-85, only for 8-string guitars. Like the 85 the 808 uses two Alnico magnet loaded coils weth a wide aperature to maintain a beefy low-end and a fatter top end. Perfect for low tuning. It's a great choice for a chunky rhythm pickup, just pure Alnico magnets do the trick. The midrange has better definition and doesn't get foggy or muddy in the rhythm position. The EMG-808 is in a 40DC housing. (read more...) |
Regular Price: $139.99 On Sale For: $108.00 |
|
 |
EMG-81-7 Humbucker Pickup The EMG-81-7 is a seven string pickup for guitar. The EMG-81-7 has the familiar U-shaped humbucking structure but uses steel bats and a ceramic magnet. Like the popular EMG-81 , the 81-7 is a dual coil pickup with Alnico poles similar to the 81, wth the same amount of output and all the attributes of the EMG-81, but for your seven string guitar. (read more...) |
Regular Price: $139.99 On Sale For: $108.00 |
|
 |
EMG-A25KX2 Dual Volume Pot Stacked Dual concentric volume pot (Stacked) (read more...) |
Price: $13.25 | |
 |
EMG-AB After Burner The AB (Afterburner) is a push/pull booster with up to 20dB of preset variable gain, perfect for having fun with clean overdrive and distortion. It works with both active and passive pickups, uses rail-to-rail technology, and is easy to install. If you're a lead player, the Afterburner is for you. (read more...) |
Regular Price: $59.99 On Sale For: $47.00 |
|
 |
EMG-AJ125 Acoustic System A stand-alone pickup/preamp system, the EMG-AJ125 comes with an EMG-AT125U Pickup, along with a custom preamp that's mounted directly to EMG's own UltraJak. The AmpJak systems are mono (single channel) and are not intended to be mixed with the EMG-ACS or other EMG Acoustic Products. The Ultrajak is the simplest of all endpin jacks to install, just a turn of an internal screw and it's mounted. The AmpJak features a specially designed preamp that has a lowfrequency rolloff at 18dB per octave to remove the "boom" from your acoustic guitar. In addition, a subtle low mid-range contour enhances the overall tone. The result is great acoustic tone, that's natural and open. A trimpot is located on the board to let you adjust the output. A unique canvas battery bag holds the battery and conveniently fastens anywhere inside the instrument. Instructions and diagrams are included for easy installation, although we recommend installation by a skilled repairman. The AmpJak is installed as standard equipment in many of the Tacoma Guitars including the Papoose and Chief Models. (read more...) |
Regular Price: $104.00 On Sale For: $83.00 |
|
 |
EMG-AJ93 Acoustic System A stand-alone pickup/preamp system, the EMG-AJ93 comes with an EMG-AT93U Pickup, along with a custom preamp that's mounted directly to EMG's own UltraJak. The AmpJak systems are mono (single channel) and are not intended to be mixed with the EMG-ACS or other EMG Acoustic Products. The Ultrajak is the simplest of all endpin jacks to install, just a turn of an internal screw and it's mounted. The AmpJak features a specially designed preamp that has a lowfrequency rolloff at 18dB per octave to remove the "boom" from your acoustic guitar. In addition, a subtle low mid-range contour enhances the overall tone. The result is great acoustic tone, that's natural and open. A trimpot is located on the board to let you adjust the output. A unique canvas battery bag holds the battery and conveniently fastens anywhere inside the instrument. Instructions and diagrams are included for easy installation, although we recommend installation by a skilled repairman. The AmpJak is installed as standard equipment in many of the Tacoma Guitars including the Papoose and Chief Models. (read more...) |
Regular Price: $104.00 On Sale For: $83.00 |
|
 |
EMG-AJ93-L Acoustic System A stand-alone pickup/preamp system, the EMG-AJ93-L comes with an EMG-AT93U-L Pickup, along with a custom preamp that's mounted directly to EMG's own UltraJak. The AmpJak systems are mono (single channel) and are not intended to be mixed with the EMG-ACS or other EMG Acoustic Products. The Ultrajak is the simplest of all endpin jacks to install, just a turn of an internal screw and it's mounted. The AmpJak features a specially designed preamp that has a lowfrequency rolloff at 18dB per octave to remove the "boom" from your acoustic guitar. In addition, a subtle low mid-range contour enhances the overall tone. The result is great acoustic tone, that's natural and open. A trimpot is located on the board to let you adjust the output. A unique canvas battery bag holds the battery and conveniently fastens anywhere inside the instrument. Instructions and diagrams are included for easy installation, although we recommend installation by a skilled repairman. The AmpJak is installed as standard equipment in many of the Tacoma Guitars including the Papoose and Chief Models. (read more...) |
Regular Price: $148.00 On Sale For: $118.00 |
|
 |
EMG-ALX Alexi Laiho Signature Model w/ABQ He's not called the wild child for nothing! Ripping insane leads and redefining the metal genre with his amazing chops, Alexi gets his tone from his NEW EMG signature set. The EMG-ALX HZ w/ ABQ boost/EQ is composed of a single custom HZ passive humbucker paired with a gain boost/3 band EQ on a push/pull pot. (read more...) |
Regular Price: $139.99 On Sale For: $99.00 |
|
 |
EMG-Ampjak Acoustic Preamp The EMG-AMPJAK is a custom preamp that is mounted directly to EMG's own UltraJak. This specially designed preamp has a low-frequency rolloff at 18dB per octave to remove the "boom" from your acoustic guitar and includes a subtle low mid-range contour that enhances the overall tone. The result is great acoustic tone, that's natural and open. (read more...) |
Regular Price: $83.00 On Sale For: $66.00 |
|
 |
EMG-APA-2 Acoustic Preamp This is a miniature preamp/battery holder unit that is easily mounted to the neck block using a 3M dual-lok fastener. It incorporates a FET input for low noise and a very high input impedance (20 megohms) so you can finally get every ounce of tone your guitar is capable of producing. The low output impedance (2k ohms) allows you to plug into a guitar amp, mixing board, even directly into a tape/digital recorder with the same fabulous results. The most amazing aspect of this technology is that the pickup is virtually invisible. The natural tone of the guitar is amplified without added overtones or coloration. What you play is what you hear: highs with a natural brilliance and a low end that's full and rich. The total result is a pickup system for acoustic guitar that sounds as alive through a combo amp or mixing board as it does acoustically. (read more...) |
Regular Price: $109.99 On Sale For: $89.00 |
|
 |
EMG-AS125U The EMG-AS93U and EMG-AS125U are the most natural sounding saddle transducer systems in the world. EMG was the first to produce a piezo film pickup and has received two patents for our designs. The EMG-AS93U and AS125U are complete systems that include a saddle pickup, APA-2 preamp, and the EMG Ultrajak. Pickup included: AT93 or AT125 EMG pickup uses piezo film in a layered format (Bimorph) that has many advantages over other film designs as well as piezo crystals. The layering allows a lower output impedance as well as double the output of other designs. Unlike the crystals, the film has no resonance in the audible region so it doesn't have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, any number of strings or string spacing can be used. Before purchasing you should measure the width of the saddle of your guitar to be sure you get the right pickup. The AS93U System is for 3/32 inch saddle width. The AS125U System is for 1/8 inch saddle width. Also available is the AS93U-L System for instruments with a split saddle. Included with each system is our EMG-APA-2 preamp. This is a miniature preamp/battery holder unit that is easily mounted to the neck block using a 3M dual-lok fastener. It incorporates a FET input for low noise and a very high input impedance (20 megohms) so you can finally get every ounce of tone your guitar is capable of producing. The low output impedance (2k ohms) allows you to plug into a guitar amp, mixing board, even directly into a tape/digital recorder with the same fabulous results. The most amazing aspect of this technology is that the pickup is virtually invisible. The natural tone of the guitar is amplified without added overtones or coloration. What you play is what you hear: highs with a natural brilliance and a low end that's full and rich. The total result is a pickup system for acoustic guitar that sounds as alive through a combo amp or mixing board as it does acoustically. (read more...) |
Regular Price: $159.99 On Sale For: $125.00 |
|
 |
EMG-AS93U The EMG-AS93U and EMG-AS125U are the most natural sounding saddle transducer systems in the world. EMG was the first to produce a piezo film pickup and has received two patents for our designs. The EMG-AS93U and AS125U are complete systems that include a saddle pickup, APA-2 preamp, and the EMG Ultrajak. Pickup included: AT93 or AT125 EMG pickup uses piezo film in a layered format (Bimorph) that has many advantages over other film designs as well as piezo crystals. The layering allows a lower output impedance as well as double the output of other designs. Unlike the crystals, the film has no resonance in the audible region so it doesn't have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, any number of strings or string spacing can be used. Before purchasing you should measure the width of the saddle of your guitar to be sure you get the right pickup. The AS93U System is for 3/32 inch saddle width. The AS125U System is for 1/8 inch saddle width. Also available is the AS93U-L System for instruments with a split saddle. Included with each system is our EMG-APA-2 preamp. This is a miniature preamp/battery holder unit that is easily mounted to the neck block using a 3M dual-lok fastener. It incorporates a FET input for low noise and a very high input impedance (20 megohms) so you can finally get every ounce of tone your guitar is capable of producing. The low output impedance (2k ohms) allows you to plug into a guitar amp, mixing board, even directly into a tape/digital recorder with the same fabulous results. The most amazing aspect of this technology is that the pickup is virtually invisible. The natural tone of the guitar is amplified without added overtones or coloration. What you play is what you hear: highs with a natural brilliance and a low end that's full and rich. The total result is a pickup system for acoustic guitar that sounds as alive through a combo amp or mixing board as it does acoustically. (read more...) |
Regular Price: $159.99 On Sale For: $125.00 |
|
 |
EMG-AS93U-L Split Saddle The EMG-AS93U-L (Split Saddle) and EMG-AS125U-L (Split Saddle) are the most natural sounding saddle transducer systems in the world. EMG was the first to produce a piezo film pickup and has received two patents for our designs. The EMG-AS93U and AS125U are complete systems that include a saddle pickup, APA-2 preamp, and the EMG Ultrajak. Pickup included: AT93 or AT125 EMG pickup uses piezo film in a layered format (Bimorph) that has many advantages over other film designs as well as piezo crystals. The layering allows a lower output impedance as well as double the output of other designs. Unlike the crystals, the film has no resonance in the audible region so it doesn't have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, any number of strings or string spacing can be used. Before purchasing you should measure the width of the saddle of your guitar to be sure you get the right pickup. The AS93U System is for 3/32 inch saddle width. The AS125U System is for 1/8 inch saddle width. Also available is the AS93U-L System for instruments with a split saddle. Included with each system is our EMG-APA-2 preamp. This is a miniature preamp/battery holder unit that is easily mounted to the neck block using a 3M dual-lok fastener. It incorporates a FET input for low noise and a very high input impedance (20 megohms) so you can finally get every ounce of tone your guitar is capable of producing. The low output impedance (2k ohms) allows you to plug into a guitar amp, mixing board, even directly into a tape/digital recorder with the same fabulous results. The most amazing aspect of this technology is that the pickup is virtually invisible. The natural tone of the guitar is amplified without added overtones or coloration. What you play is what you hear: highs with a natural brilliance and a low end that's full and rich. The total result is a pickup system for acoustic guitar that sounds as alive through a combo amp or mixing board as it does acoustically. (read more...) |
Regular Price: $199.99 On Sale For: $161.00 |
|
 |
EMG-AT125U Acoustic Pickup The EMG-AT93U and EMG-AT125U are the same natural sounding saddle pickups featured in the AS93U and AS125U Systems. Available in two widths, 3/32 and 1/8 inch, each patented EMG pickup uses piezo film layered in a bimorph design. This design has many advantages over the old design using piezo crystals. Unlike the crystals, the film has no resonance in the audible region so it does not have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, the number of strings and string spacing becomes a non-factor. Each AT93U and AT125U include the EMG UltraJak. There are a couple of reasons you would want to purchase a pickup separately. Firstly, if you're using an external preamp system that allows you to plug the pickup in directly without the on-board APA-2 preamp. Secondly, if you just want a pickup you can use for practicing at home and don't require great sound, just some output. The output impedance of the AT93 and AT125 pickups is about 3.0 MegOhm so in order to get full bandwidth frequency response you need a preamplifier with an input impedance of at least 10 MegOhms. (read more...) |
Regular Price: $69.99 On Sale For: $54.00 |
|
 |
EMG-AT93U Acoustic Pickup The EMG-AT93U and EMG-AT125U are the same natural sounding saddle pickups featured in the AS93U and AS125U Systems. Available in two widths, 3/32 and 1/8 inch, each patented EMG pickup uses piezo film layered in a bimorph design. This design has many advantages over the old design using piezo crystals. Unlike the crystals, the film has no resonance in the audible region so it does not have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, the number of strings and string spacing becomes a non-factor. Each AT93U and AT125U include the EMG UltraJak. There are a couple of reasons you would want to purchase a pickup separately. Firstly, if you're using an external preamp system that allows you to plug the pickup in directly without the on-board APA-2 preamp. Secondly, if you just want a pickup you can use for practicing at home and don't require great sound, just some output. The output impedance of the AT93 and AT125 pickups is about 3.0 MegOhm so in order to get full bandwidth frequency response you need a preamplifier with an input impedance of at least 10 MegOhms. (read more...) |
Regular Price: $69.99 On Sale For: $54.00 |
|
 |
EMG-AT93U-L Acoustic Pickup The EMG-AT93U-L (Split Saddle) is the same natural sounding saddle pickups featured in the AS93U and AS125U Systems. Available in two widths, 3/32 and 1/8 inch, each patented EMG pickup uses piezo film layered in a bimorph design. This design has many advantages over the old design using piezo crystals. Unlike the crystals, the film has no resonance in the audible region so it does not have that annoying harshness inherent in the crystal pickups. Secondly, because the film runs the length of the pickup, the number of strings and string spacing becomes a non-factor. Each AT93U and AT125U include the EMG UltraJak. There are a couple of reasons you would want to purchase a pickup separately. Firstly, if you're using an external preamp system that allows you to plug the pickup in directly without the on-board APA-2 preamp. Secondly, if you just want a pickup you can use for practicing at home and don't require great sound, just some output. The output impedance of the AT93 and AT125 pickups is about 3.0 MegOhm so in order to get full bandwidth frequency response you need a preamplifier with an input impedance of at least 10 MegOhms. (read more...) |
Regular Price: $109.99 On Sale For: $89.00 |
|
 |
EMG-B Bouzouki Pickup EMG is world leader in pickups for the Bouzouki, an 8-stringed acoustic instrument played primarily in Greece. The EMG-B pickup features an EMG-FT pickup with a bracket and battery mount, making it easy to attach to a bouzouki (or any other instrument which is similar in size). (read more...) |
Regular Price: $109.99 On Sale For: $89.00 |
|
 |
EMG-BAL Balance Control Pot Balance Pot: Dual Gang. Solid Shaft 25K Ohm Linear Taper (read more...) |
Price: $14.00 | |
 |
EMG-BQC Control The BQC Control features a bass and treble equalizer on a concentric (stacked) pot along with the concentric (stacked) mid-control. It takes up very little space and will work with any pickup, active or passive. It comes complete with knobs including 2 extra volume knobs. (read more...) |
Regular Price: $139.99 On Sale For: $108.00 |
|
 |
EMG-BQC System For EMG pickups only, the BQC System features a pre-wired balance control (blend) and master volume with both the bass and treble on a concentric pot as well as the mid-control. All the EQ controls and balance control feature center detents. (read more...) |
Regular Price: $169.99 On Sale For: $133.00 |
|